- 진정한 Distance vector Protocol - 30초마다 전체 라우팅 테이블을 active interface로 전송함 - 최대허용 hop수는 15 이고 16은 도달불능으로 간주함 - 소규모 네트워크에서 효율적으로 동작 - RIP V.1은 classful routing - RIP V.2는 classless routing (prefix routing) - RIP timer 1. Route update timer(30초) 2. Route invalid timer(90초) 3. Route flush timer(240초)
Q. VLAN 설정
- 1900 스위치에서는 64개의 가상랜을 생성할 수 있다. - 각 가상랜마다 각각의 spanning-tree instance가 설정될 수 있다. - 1900 스위치는 DISL(Dynamic Inter-Switch Link) encapsulation 방법을 사용할 수 있다. - ISL routing(Inter-Switch Link routing) 스위치 인터네트워크에서 프레임에 태깅하는 Cisco가 가지고 있는 방법이다. 프레임 태깅은 스위치 인터네트워크에서 프레임의 VLAN 멤버쉽을 정의하는 것이다.
Q. STP
- STP는 네트워크를 계속 감시하여 모든 링크를 찾아내어 루프가 발생하지 않도록 이중화 링크들을 차단한다. - 한 네트워크에서는 오직 하나의 루트브릿지가 존재함 - STP를 작동하는 스위치나 브릿지는 BPDU(Bridge Protocol Data Unit)라 부르는 정보를 교환한다. - BPDU는 매 2초마다 송신한다 - 브릿지 ID는 8byte이며 장비의 우선순위와 MAC어드레스 정보가 포함되어 있다. - IEEE STP가 작동하는 모든 장비의 우선순위 값은 32767 - root 브릿지의 우선순위는 MAC
Q. STP의 포트 상태
-Blocking, Listening, Learning, Forwarding -Convergence는 브릿지와 스위치가 forwarding이나 blocking상태로 변환되면 발생한다. -일반적으로 blocking에서 forwarding상태로 바뀌는데 50초 걸린다.
Q. LAN 스위치 방식의 3가지를 설명
1. Store-and-Forward
보드상 버퍼에 프레임 전체를 복사하며, CRC를 계산한다. 프레임 전체를 버퍼에 복사하기 때문에 스위치의 latency가 프레임의 길이에 따라 다르다. CRC 오류가 있거나, 너무 작거나(64>CRC<1518) 너무 큰 경우 프레임은 폐기된다. 프레임에 오류가 없는 경우 LAN스위치는 포워딩 혹은 스위칭 테이블에서 수신지 하드웨어 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정한다. Catalyst 5000 series에서 사용, 스위치상에서 동작방식을 수정할 수 없다.
2. Cut-Through(Real Time)
LAN스위치가 보드상 버퍼에 수신지 어드레스만 복사한 후 MAC 스위칭 테이블에서 수신지 하드웨어 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정하고 수신지에 프레임을 포워드한다. Cut-through 스위치는 수신지 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정하는 즉시 프레임을 포워드하기 때문에 대기시간이 단축된다.
3. Fragment Free(개정판 Cut-Through)
스위치는 충돌 윈도우(64 byte)를 수신하기까지 프레임을 포워딩하지 않는다. 이는 패킷내의 오류는 거의 대부분 첫 64byte에서 발생하기 때문이다. FragmentFree 방식에서는 실제 대기시간을 늘리지 않고 cut-through방식보다 나은 오류 검증을 제공한다. 1900스위치의 기본 스위칭 방식이다.
Q. 각 layer의 characteristic
1. Application layer
www, e-mail gateway, EDI(Electronic Data Interchange), Special interest bulletin boards, Internet Navigation Utilities, Financial Transaction Service, etc...
NFS(Network File System), SQL(Structured Query Language), RPC(Remote Prcedure Call), X window, ASP (AppleTalk Session Protocol), DNA SCP(Digital Network Architecture Session Control Protocol), etc...
4. Transport Layer(TCP)
Flow Control Connection-Oriented Communication Windowing Acknowledgement
5. Network Layer(IP)
Routing & addressing Router는 broadcast domain을 분할한다. 또한 브로드캐스트나 멀티캐스트의 어떤 패킷도 전송하지 않을 수 있다. 라우터는 인접 hop 라우터에게 패킷을 전송할 경우, 네트워크 레이어 헤더의 논리적 어드레스를 사용한다.
6. Data Link Layer
MAC(Media Access Control) 802.3 - 미디어에 패킷을 싣는 방법에 대하여 정의함, 논리적 토폴로지, 물리적 어드레스 도 정의됨 LLC(Logical Link Control) 802.2 네트워크 레이어 프로토콜을 식별하고 캡슐화 함. LLC헤더는 데이터링크 계층에 프레임이 수신되면 패킷을 가지고 무엇을 해야할 지 알려줌 스위치와 브리지는 이 레이어에서 작동하며, MAC address를 사용하여 네트웍을 필터링함.
Ethernet Novell Cisco Keyword Ethernet 802.3 novell-ether(default) Ethernet 802.2 sap Etehrnet II arpa Ethernet_snap snap Token Ring Token Ring sap(default) Token-Ring_snap snap
Q. ARP ?
-Address Resolution Protocol -알고 있는 IP 어드레스로부터 호스트의 하드웨어 어드레스를 알아낸다. -ARP는 IP 어드레스를 Ethernet 어드레스로 변화시킨다. -RARP는 Ethernet 어드레스를 IP 어드레스로 변환시킨다.
Q. Transport layer protocol의 3가지 특징
-Flow control -Connection-Oriented Communication -Windowing
Q. Frame Relay에서의 CIR의 의미는?
-Committed Information Rate -Frame Relay네트워크가 동의한 전송정보의 최소 비율로서 bps로 측정됨
Q. ISDN Protocols
ISDN protocols are defined by the ITU, and there are several series of protocols dealing with diverse issues: -Protocols beginning with the letter E deal with using ISDN on the existing telephone network. -Protocols beginning with the letter I deal with concepts, aspects, and services. -Protocols beginning with the letter Q cover switching and signaling.
Q. Frame Relay 에서 PPP connection을 할 때 해야할 두가지 작업은?
Q. 한 라우터는 IP RIP이 설정되었으나 다른 라우터는 안되어 있다. 모든 RIP routing이 업데이트 되는 것을 막는 커맨드는?
router#conf t router(config)#router rip router(config-router)#network x.x.0.0 router(config-router)#passive-interface serial 0 -RIP 업데이트가 시리얼 인터페이스 0으로 전파되지 못하게 지정한 것. 그러나 s0는 여전히 RIP 업데이트를 수신할 수는 있다.
Q. VLAN의 이점은?
-Broadcast Control -Security -Flexibility and Scalability
Q. 스위치타입에 대한 설명 (앗,, 영어당…, 허나 이정도는…)
Store and forward - The complete data frame is received on the switch's buffer, a CRC is run, and then the destination address is looked up in the MAC filter table. Cut-through - The switch only waits for the destination hardware address to be received and then looks up the destination address in the MAC filter table. FragmentFree - The default for the Catalyst 1900 switch, it is sometimes referred to as modified cut-through. Checks the first 64 bytes of a frame for fragmentation (because of possible collisions) before forwarding the frame.
Q. IP 네트웍에 대한 설명으로 맞는 것은?
1. MAC address is part of the physical layer 2. MAC address are used by bridge to make forwarding decision; IP address are used by routers 3. MAC은 OSI model의 layer 2에 속한다.
Q. Network layer의 4가지 특징
1. It uses two part address 2. It maintains routing table 3. It establish network address 4. It provide path selection for networking
Q. LAN의 속도를 높일 수 있는 방법은?
-스위치를 사용한다.
Q. IPX가 다중 logical network를 지원하는 방법은?
1. network number 2. routing protocol 3. encapsulation type 4. autonomous system number
Q. What is the protocol and what is the second part of the following network address? 255.255.255.255
-IP : a flooded broadcast -IPX : a flooded broadcast
CCNA의 자격증에 대해서....
Q. RIP 의 특징
- 진정한 Distance vector Protocol
- 30초마다 전체 라우팅 테이블을 active interface로 전송함
- 최대허용 hop수는 15 이고 16은 도달불능으로 간주함
- 소규모 네트워크에서 효율적으로 동작
- RIP V.1은 classful routing
- RIP V.2는 classless routing (prefix routing)
- RIP timer
1. Route update timer(30초)
2. Route invalid timer(90초)
3. Route flush timer(240초)
Q. VLAN 설정
- 1900 스위치에서는 64개의 가상랜을 생성할 수 있다.
- 각 가상랜마다 각각의 spanning-tree instance가 설정될 수 있다.
- 1900 스위치는 DISL(Dynamic Inter-Switch Link) encapsulation 방법을 사용할 수 있다.
- ISL routing(Inter-Switch Link routing) 스위치 인터네트워크에서 프레임에 태깅하는
Cisco가 가지고 있는 방법이다. 프레임 태깅은 스위치 인터네트워크에서 프레임의 VLAN
멤버쉽을 정의하는 것이다.
Q. STP
- STP는 네트워크를 계속 감시하여 모든 링크를 찾아내어 루프가 발생하지 않도록 이중화 링크들을 차단한다.
- 한 네트워크에서는 오직 하나의 루트브릿지가 존재함
- STP를 작동하는 스위치나 브릿지는 BPDU(Bridge Protocol Data Unit)라 부르는 정보를 교환한다.
- BPDU는 매 2초마다 송신한다
- 브릿지 ID는 8byte이며 장비의 우선순위와 MAC어드레스 정보가 포함되어 있다.
- IEEE STP가 작동하는 모든 장비의 우선순위 값은 32767
- root 브릿지의 우선순위는 MAC
Q. STP의 포트 상태
-Blocking, Listening, Learning, Forwarding
-Convergence는 브릿지와 스위치가 forwarding이나 blocking상태로 변환되면 발생한다.
-일반적으로 blocking에서 forwarding상태로 바뀌는데 50초 걸린다.
Q. LAN 스위치 방식의 3가지를 설명
1. Store-and-Forward
보드상 버퍼에 프레임 전체를 복사하며, CRC를 계산한다. 프레임 전체를 버퍼에 복사하기 때문에 스위치의 latency가 프레임의 길이에 따라 다르다. CRC 오류가 있거나, 너무 작거나(64>CRC<1518) 너무 큰 경우 프레임은 폐기된다. 프레임에 오류가 없는 경우 LAN스위치는 포워딩 혹은 스위칭 테이블에서 수신지 하드웨어 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정한다. Catalyst 5000 series에서 사용, 스위치상에서 동작방식을 수정할 수 없다.
2. Cut-Through(Real Time)
LAN스위치가 보드상 버퍼에 수신지 어드레스만 복사한 후 MAC 스위칭 테이블에서 수신지 하드웨어 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정하고 수신지에 프레임을 포워드한다. Cut-through 스위치는 수신지 어드레스를 참조하여 외부로 송신하는 인터페이스를 결정하는 즉시 프레임을 포워드하기 때문에 대기시간이 단축된다.
3. Fragment Free(개정판 Cut-Through)
스위치는 충돌 윈도우(64 byte)를 수신하기까지 프레임을 포워딩하지 않는다. 이는 패킷내의 오류는 거의 대부분 첫 64byte에서 발생하기 때문이다. FragmentFree 방식에서는 실제 대기시간을 늘리지 않고 cut-through방식보다 나은 오류 검증을 제공한다. 1900스위치의 기본 스위칭 방식이다.
Q. 각 layer의 characteristic
1. Application layer
www, e-mail gateway, EDI(Electronic Data Interchange), Special interest bulletin boards, Internet Navigation Utilities, Financial Transaction Service, etc...
2. Presentation layer
PICT, TIFF(Tagged Image File Format), JPEG, MIDI, MPEG, Quick time, etc...
3. Session layer
NFS(Network File System), SQL(Structured Query Language), RPC(Remote Prcedure Call), X window, ASP (AppleTalk Session Protocol), DNA SCP(Digital Network Architecture Session Control Protocol), etc...
4. Transport Layer(TCP)
Flow Control
Connection-Oriented Communication
Windowing
Acknowledgement
5. Network Layer(IP)
Routing & addressing
Router는 broadcast domain을 분할한다. 또한 브로드캐스트나 멀티캐스트의 어떤 패킷도 전송하지 않을 수 있다.
라우터는 인접 hop 라우터에게 패킷을 전송할 경우, 네트워크 레이어 헤더의 논리적 어드레스를 사용한다.
6. Data Link Layer
MAC(Media Access Control) 802.3 - 미디어에 패킷을 싣는 방법에 대하여 정의함, 논리적 토폴로지, 물리적 어드레스
도 정의됨
LLC(Logical Link Control) 802.2 네트워크 레이어 프로토콜을 식별하고 캡슐화 함. LLC헤더는 데이터링크 계층에
프레임이 수신되면 패킷을 가지고 무엇을 해야할 지 알려줌
스위치와 브리지는 이 레이어에서 작동하며, MAC address를 사용하여 네트웍을 필터링함.
7. Physical layer
Ethernet
10Base2 - 10Mbps, 185m
10Base5 - 10MBps, 500m
10BaseT - category5, 10Mbps
Q. Connection Oriented method
call setup - data transfer - call termination
Q. IPX의 encapsulation type
Ethernet Novell Cisco Keyword
Ethernet 802.3 novell-ether(default)
Ethernet 802.2 sap
Etehrnet II arpa
Ethernet_snap snap
Token Ring Token Ring sap(default)
Token-Ring_snap snap
Q. ARP ?
-Address Resolution Protocol
-알고 있는 IP 어드레스로부터 호스트의 하드웨어 어드레스를 알아낸다.
-ARP는 IP 어드레스를 Ethernet 어드레스로 변화시킨다.
-RARP는 Ethernet 어드레스를 IP 어드레스로 변환시킨다.
Q. Transport layer protocol의 3가지 특징
-Flow control
-Connection-Oriented Communication
-Windowing
Q. Frame Relay에서의 CIR의 의미는?
-Committed Information Rate
-Frame Relay네트워크가 동의한 전송정보의 최소 비율로서 bps로 측정됨
Q. ISDN Protocols
ISDN protocols are defined by the ITU, and there are several series of protocols dealing
with diverse issues:
-Protocols beginning with the letter E deal with using ISDN on the existing telephone network.
-Protocols beginning with the letter I deal with concepts, aspects, and services.
-Protocols beginning with the letter Q cover switching and signaling.
Q. Frame Relay 에서 PPP connection을 할 때 해야할 두가지 작업은?
-Physical interface에서 IP를 죽인다. (반드시 나오는 문제.. BCRAN에두 나옵니다..)
-각 subinterface마다 dlci를 수동으로 설정한다.
Q. RIP을 셋팅하기 위한 prompt and command ? (이것은 시뮬문제랑 같죠? (^^;)
router(config)#router rip
router(config-router)#network x.x.0.0
router(config-router)#^Z
#
Q. 한 라우터는 IP RIP이 설정되었으나 다른 라우터는 안되어 있다. 모든 RIP routing이 업데이트 되는 것을 막는 커맨드는?
router#conf t
router(config)#router rip
router(config-router)#network x.x.0.0
router(config-router)#passive-interface serial 0
-RIP 업데이트가 시리얼 인터페이스 0으로 전파되지 못하게 지정한 것. 그러나 s0는 여전히 RIP 업데이트를
수신할 수는 있다.
Q. VLAN의 이점은?
-Broadcast Control
-Security
-Flexibility and Scalability
Q. 스위치타입에 대한 설명 (앗,, 영어당…, 허나 이정도는…)
Store and forward - The complete data frame is received on the switch's buffer, a CRC is run, and then the destination address is looked up in the MAC filter table.
Cut-through - The switch only waits for the destination hardware address to be received and then looks up the destination address in the MAC filter table.
FragmentFree - The default for the Catalyst 1900 switch, it is sometimes referred to as modified cut-through.
Checks the first 64 bytes of a frame for fragmentation (because of possible collisions)
before forwarding the frame.
Q. IP 네트웍에 대한 설명으로 맞는 것은?
1. MAC address is part of the physical layer
2. MAC address are used by bridge to make forwarding decision; IP address are used by routers
3. MAC은 OSI model의 layer 2에 속한다.
Q. Network layer의 4가지 특징
1. It uses two part address
2. It maintains routing table
3. It establish network address
4. It provide path selection for networking
Q. LAN의 속도를 높일 수 있는 방법은?
-스위치를 사용한다.
Q. IPX가 다중 logical network를 지원하는 방법은?
1. network number
2. routing protocol
3. encapsulation type
4. autonomous system number
Q. What is the protocol and what is the second part of the following network address? 255.255.255.255
-IP : a flooded broadcast
-IPX : a flooded broadcast
Q. LAN segmentation의 장점은?
-smaller collision domain
Q. ICMP의 권고안은?
-RFC 1256