Jurassic War ------------------------------------- This is a FAQ(frequently Asked question) about our game Jurassic War. Q] 'DOS4/GW ........... not ehough memory' ? A] The minimum memory requirement for this game is 8 mb, though too much TRS programs, like SmartDRV, might cause such a problem. In this case, you can solve this problem by editing your CONFIG.SYS and/or AUTOEXEC.BAT file on your root directory. To get some more specific information about your memory in your system, please use Setup.exe. This is an example of a CONFIG.SYS and AUTOEXEC.BAT file below. C:\CONFIG.SYS file: DOS=HIGH,UMB BUFFERS=50,0 FILES=50 STACKS=16,512 DEVICE=C:\DOS\HIMEM.SYS DEVICE= Install CD-ROM DEVICE DRIVER C:\AUTOEXEC.BAT file: C:\DOS\MOUSE C:\CDROM\MSCDEX ... Install CD-ROM DRIVER If you use SoundBlaster PRO or better, You can set the volume here. example) SB16User C:\SB16\SB16SET /P /Q C:\SB16\DIAGNOSE /S [NOTE] Remark EMM386.EXE device on your C:\CONFIG.SYS file, Like this 'REM DEVICE=C:\DOS\EMM386.EXE ...'
Q] I am a windows 95 user. What should I do? A] Basically, you can execute this game in the MS-DOS windowbut if you have 8 mb of RAM on your system, you might fail to run your game properly because Windows 95 takes a certain amount of memory. In this case Press F8 key when you rebootthe system and select "Command prompt only menu" to runyour system in DOS mode than you can enjoy this game properly.
Q] I can't move my mouse to the right and the bottom of the screen. A] If your mouse movement is not smooth enough, it may cause such a problem. If you look at the cursor's movement, you may see it skip some of the pixels when it moves. Since it prevents mouse cursors to reach the edge of the screen, the screen dosen't move properly. To solve this problem, you can change your mouse driver to the mouse driver thats offered with Ms-Dos or Ms-Windows, and you can check yourself to see if it's 100% compatible with Ms-mouse.
Q] The game seems too slow on my system. Is there any way I can make it better? A] If you select your sound card setup ( not using "Autodetection"), you can select sound quality at the end. In here you can select sound quality as middle or low and expect better performance.And if you get rid of the EMM386 or QEMM on your system, the speed might be a little better. You can expect to run this game properly when you have 486 DX2 - 66 or better.
Q] Soundcard Autodetection seems like its not working. A] When your sound card is not 100% compatible with Sound Blaster, it migh not work too good. When this happens, you should set your card up yourself.
Q] I set up my sound card with "Autodetection " but I can't hear anything. A] Some of SoundBlaster soundcard detected as SoundBlaster Pro even though it is compatible with SoundBlaster 2.* . When this happens you can change the setting to SoundBlaster 2.* manually.
Q] After setup, I can here the music for a while, but but then it stops. A] This problem is caused when setup detects the wrong IRQ address. If your card uses a IRQ under 10, it can be detected but not supported. You should change the IRQ number for your sound card to play the game with sound.
Q] I can hear some strange noise when music is playing. A] When your sound card is not 100% compatible with Sound Blaster, this might happen. In this case, run the soundcard initialize software thats bundled with your soundcard and set up the sound volume.
Q] How can I run modem play?. A] First, select proper com port and BPS(Bit Prt Second). You and your opponent must have same BPS setting. One selects "dial" when the other selects "receive" then both players will be connected. After you make a connection, you can select a tribe you want and your opponet can be your allie or enemy. (You can check up the manual for detail.)
Q] How can I initialize my modem?. A] When you initialize your modem, ATZ and AT\N0 & K3 have to be included on your command to inactivate the data compression option and error check option. And select CTS/DTR option. Basic initialize. ATZ - modem basic initialize. AT/N0 & K3 - compress/error check inactivate.
Q] How can I play a Null-Modem game?. A] Install a cable on your COM port that is available, select proper COM port and transfer speed on multiplay menu. At this time you have to be sure you have the same transfer speed with your opponent. Then select Null-Modem and play as if your playing modem play.
Q] How come a "GAME ERROR" message occurs when I am in a multiplayer game?. A] That is because you have too much noise on your phone line, so the error can not be corrected properly by modem. If you initialize your modem and select transfer speed properly, you can avoid this problem.
Q] Where can I have a tech-support ? A] E-Mail address : tranquil@chollian.dacom.co.kr TRIC@hitel.kol.co.kr Copyright (C) TRIC 1995-1996
Basic initialize.
Jurassic War -------------------------------------
This is a FAQ(frequently Asked question) about our game Jurassic War.
Q] 'DOS4/GW ........... not ehough memory' ?
A] The minimum memory requirement for this game is 8 mb, though too much TRS programs, like SmartDRV, might cause such a problem. In this case, you can solve this problem by editing your CONFIG.SYS and/or AUTOEXEC.BAT file on your root directory. To get some more specific information about your memory in your system, please use Setup.exe. This is an example of a CONFIG.SYS and AUTOEXEC.BAT file below. C:\CONFIG.SYS file:
DOS=HIGH,UMB BUFFERS=50,0 FILES=50 STACKS=16,512 DEVICE=C:\DOS\HIMEM.SYS DEVICE= Install CD-ROM DEVICE DRIVER
C:\AUTOEXEC.BAT file:
C:\DOS\MOUSE C:\CDROM\MSCDEX ... Install CD-ROM DRIVER If you use SoundBlaster PRO or better, You can set the volume here. example) SB16User C:\SB16\SB16SET /P /Q C:\SB16\DIAGNOSE /S
[NOTE] Remark EMM386.EXE device on your C:\CONFIG.SYS file, Like this 'REM DEVICE=C:\DOS\EMM386.EXE ...'
Q] I am a windows 95 user. What should I do?
A] Basically, you can execute this game in the MS-DOS windowbut if you have 8 mb of RAM on your system, you might fail to run your game properly because Windows 95 takes a certain amount of memory. In this case Press F8 key when you rebootthe system and select "Command prompt only menu" to runyour system in DOS mode than you can enjoy this game properly.
Q] I can't move my mouse to the right and the bottom of the screen.
A] If your mouse movement is not smooth enough, it may cause such a problem. If you look at the cursor's movement, you may see it skip some of the pixels when it moves. Since it prevents mouse cursors to reach the edge of the screen, the screen dosen't move properly.
To solve this problem, you can change your mouse driver to the mouse driver thats offered with Ms-Dos or Ms-Windows, and you can check yourself to see if it's 100% compatible with Ms-mouse.
Q] The game seems too slow on my system. Is there any way I can make it better?
A] If you select your sound card setup ( not using "Autodetection"), you can select sound quality at the end. In here you can select sound quality as middle or low and expect better performance.And if you get rid of the EMM386 or QEMM on your system, the speed might be a little better. You can expect to run this game properly when you have 486 DX2 - 66 or better.
Q] Soundcard Autodetection seems like its not working.
A] When your sound card is not 100% compatible with Sound Blaster, it migh not work too good. When this happens, you should set your card up yourself.
Q] I set up my sound card with "Autodetection " but I can't hear anything.
A] Some of SoundBlaster soundcard detected as SoundBlaster Pro even though it is compatible with SoundBlaster 2.* . When this happens you can change the setting to SoundBlaster 2.* manually.
Q] After setup, I can here the music for a while, but but then it stops.
A] This problem is caused when setup detects the wrong IRQ address. If your card uses a IRQ under 10, it can be detected but not supported. You should change the IRQ number for your sound card to play the game with sound.
Q] I can hear some strange noise when music is playing.
A] When your sound card is not 100% compatible with Sound Blaster, this might happen. In this case, run the soundcard initialize software thats bundled with your soundcard and set up the sound volume.
Q] How can I run modem play?.
A] First, select proper com port and BPS(Bit Prt Second). You and your opponent must have same BPS setting. One selects "dial" when the other selects "receive" then both players will be connected. After you make a connection, you can select a tribe you want and your opponet can be your allie or enemy. (You can check up the manual for detail.)
Q] How can I initialize my modem?.
A] When you initialize your modem, ATZ and AT\N0 & K3 have to be included on your command to inactivate the data compression option and error check option. And select CTS/DTR option.
Basic initialize.
ATZ - modem basic initialize. AT/N0 & K3 - compress/error check inactivate.
Q] How can I play a Null-Modem game?.
A] Install a cable on your COM port that is available, select proper COM port and transfer speed on multiplay menu. At this time you have to be sure you have the same transfer speed with your opponent. Then select Null-Modem and play as if your playing modem play.
Q] How come a "GAME ERROR" message occurs when I am in a multiplayer game?.
A] That is because you have too much noise on your phone line, so the error can not be corrected properly by modem. If you initialize your modem and select transfer speed properly, you can avoid this problem.
Q] Where can I have a tech-support ?
A] E-Mail address : tranquil@chollian.dacom.co.kr TRIC@hitel.kol.co.kr
Copyright (C) TRIC 1995-1996