Specifications CBR600RR (ED-type)

ENGINE
Type Liquid-cooled 4-stroke 16-valve DOHC inline-4
Displacement 599cm3
Bore × Stroke 67 × 42.5mm
Compression Ratio 12.2 : 1
Max. Power Output 88.1kW/13,500min-1 (95/1/EC)
Max. Torque 66Nm/11,250min-1 (95/1/EC)
Idling Speed 1,400min-1
Oil Capacity 3.5 litres
FUEL SYSTEM
Carburation PGM-DSFI electronic fuel injection
Throttle Bore 40mm
Aircleaner Dry, cartridge-type paper filter
Fuel Tank Capacity 18 litres (including 3.5-litre LCD-indicator reserve)
ELECTRICAL SYSTEM
Ignition System Computer-controlled digital transistorised with electronic advance
Ignition Timing Independent 4-cylinder 3D-mapped computer control
Sparkplug Type IMR9C-9H (NGK); VUH27D (ND)
Starter Electric
Battery Capacity 12V/8.6AH
ACG Output 343W
Headlight 12V 55W × 1 (low) / 55W × 1 (high)
DRIVETRAIN
Clutch Wet, multiplate with coil springs
Clutch Operation Mechanical; cable-actuated
Transmission Type 6-speed
Primary Reduction 2.111 (76/36)
Gear Ratios 1 2.666 (32/12)
2 1.937 (31/16)
3 1.661 (29/18)
4 1.409 (31/22)
5 1.260 (29/23)
6 1.166 (28/24)
Final Reduction 2.562 (41/16)
Final Drive #525 O-ring sealed chain

FRAME
Type Diamond; Fine Die-Cast aluminium
CHASSIS DIMENSIONS
Dimensions (L×W×H) 2,010 × 685 × 1,105mm
Wheelbase 1,375mm
Caster Angle 23° 55'
Trail 98mm
Turning Radius 3.2m
Seat Height 820mm
Ground Clearance 135mm
Dry Weight 155kg
Kerb Weight 184kg (F: 95kg; R: 89kg)
Max. Carrying Capacity 180kg
Loaded Weight 364kg (F: 130kg; R: 234kg)
SUSPENSION
Type Front 41mm fully adjustable inverted HMAS cartridge-type telescopic fork, 120mm axle travel
Rear Unit Pro-Link with gas-charged remote reservoir damper, adjustable spring preload and compression and rebound damping, 130mm axle travel
WHEELS
Type Front Hollow-section triple-spoke cast aluminium
Rear Hollow-section triple-spoke cast aluminium
Rim Size Front 17M/C × MT3.50
Rear 17M/C × MT5.50
Tyre Size Front 120/70 ZR17M/C (58W)
Rear 180/55 ZR17M/C (73W)
Tyre Pressure Front 250kPa
Rear 290kPa
BRAKES
Type Front 310 × 4.5mm dual hydraulic disc with radial-mount 4-piston callipers, floating rotors and sintered metal pads
Rear 220 × 5mm hydraulic disc with single-piston calliper and sintered metal pads